Skip to content
How to Adjust Your Cabinet Doors on an Inset Cabinet
- Adjusting your cabinet doors can be made easy with these six way adjustable hinges
- To make these adjustments, you will need a #2 POZQ screwdriver. A Phillips screwdriver may be used but is not recommended
- Adjusting your doors will allow you to have a consistent gap between the frame and doors of your cabinetry
- To adjust your door left or right, find the screw closest to the door and rotate it
- Reverse this process to move your door in the opposite direction
- To adjust your door up or down, find the recessed screw located in the middle of the adjustment plate and rotate it
- Reverse this process to move your door in the opposite direction
- The in and out adjustment will fix any flushness issues you may have with the doors in relation to each other
- Locate the adjustment screw towards the back of the cabinet and rotate it to bring your door in or out
- Reverse this process to move your door in the opposite direction
- All cabinets come standard with Blumotion hinges which allow for a soft closing door. This function can be toggled on or off by flipping the soft-close switch.
- You may need to toggle one or multiple hinges to achieve the desired closing speed you want. Door size and weight may also influence the closing speed
- After a switch has been toggled, close the door to reset it, open the door and you will notice the door will close faster or slower depending on your configuration
Page load link